LTO Tape Drive User’s Guide
1 - Product Overview
10400934-001
©2020 Overland-Tandberg
19
Specifications
Specifications for the tape drive. Specifications for tape cartridges are given in
“Environmental and Shipping Specifications for Tape Cartridges” on page 43
Installation
This section describes how to setup and install an IBM LTO tape drive from Overland-
Tandberg.
CAUTION:
While working with the unit, observe standard Electrostatic Discharge (ESD)
precautions to prevent damage to micro-circuitry or static-sensitive devices.
Physical Specifications
Specification
Dimensions
Height
42.7 mm (1.68 in.)
Width
148 mm (5.83 in.)
Length
SAS=210 mm (8.27 in.) / FC=228 mm (8.98 in.)
Weight
4.3 kg (9.4 lbs.)
Power Requirements for Internal Drives
Power Supply voltage
5 Vdc / 10 Vdc
Tolerance
10% / 10%
Voltage Ripple / Noise
(50 Hz – 20 MHz)
100 mV pp / 125 mV pp
Supply current
Minimum (steady state)
Maximum (steady state)
Peak (instantaneous power by
power supply)
2.0 A / 0.0 A
4.0 A / 1.2 A
4.5 A < 1ms / 4.0 A < 1ms
Power Specifications for External Drives
AC line voltage
100 - 240 Vac
Line frequency
50 - 60 Hz, auto-ranging
Line current at
100 Vac 0.48 A
240 Vac 0.20 A
Line current at
Other Specifications
Maximum altitude
3048 m (10,000 ft)
Maximum altitude for shipping
12192 m (40,000 ft)
Environmental Specifications
Environmental Factor
Operating Storage Shipping
Temperature
-40 to 60°C
(-40 to 140°F)
-40 to 60°C
(-40 to 140°F)
-40 to 60°C
(-40 to 140°F)
Relative humidity
20 - 80%
10 - 90%
10 - 90%
Maximum wet bulb temperature
Non-condensing Non-condensing Non-condensing
