10400469-002
12/2013
©2013 Overland Storage, Inc.
Page 4 of 5
Chassis Replacement Instructions
Move the Fans
1.
In the
old
chassis, depress the
tab
on the side of the fan to
unlock and remove it along with its housing.
The fan's power connections automatically detach.
2.
At the
new
chassis, slide the
fan
into the same slot until a
click is heard.
3.
Reinstall Top Panels
1.
Replace the
air shroud
over the motherboard.
2.
Position the
rear top panel
over the unit and seat it.
3.
Using the
4 retained screws
, secure the panel.
Three screws go on the sides and one on top.
4.
old chassis
.
Install New Chassis in Rack
Install the Chassis
1.
Using the mechanical lifter, position the
new chassis
in
front of the node’s existing rack rails.
2.
Pull the
middle
rails out of the rack, connect those rails to
the node rails, and slide the
chassis
all the way into the
rack.
3.
Secure the unit using the
two captive screws
on the
front flanges.
Reinstall the Carriers
Return the drive and blank carriers to the same drive bays
they were removed from:
1.
Position a
carrier
in front of its
empty bay
and
slide it
all the way in until it makes contact with the backplane.
2.
Close the
latch
, locking the carrier in place.
3.
all
remaining carriers, front and
rear.
IMPORTANT: To maintain proper airflow and cooling, a drive
carrier or a blank carrier must be installed in
every
bay. No
empty bays are allowed.
Reattach the Bezel
1.
Insert the
bezel tabs
in the tab slots on the left.
2.
With the tabs still in the slots, move the right side of the
bezel toward the unit until the
latch
clicks closed.
3.
If required, relock the
lock
.
