10400469-002
12/2013
©2013 Overland Storage, Inc.
Page 3 of 5
Chassis Replacement Instructions
Remove Top Panels
1.
At the
old chassis
, remove and retain the
three screws
on the sides and
one screw
on the top securing the rear
top panel.
2.
Carefully lift the
panel
off.
3.
Set the
panel
on a safe surface.
4.
Remove the
air shroud
over the motherboard.
5.
new chassis
.
Move DIMMs
All installed DIMMs need to be moved to the new chassis:
1.
Remove a DIMM in the
old chassis
by pressing the
latches on each end and popping the DIMM out.
2.
Position the DIMM in the
same slot
of the
new chassis
,
lining up the DIMM notch with the guide in the slot.
3.
Firmly press the DIMM down until it
latches
(clicks).
4.
other DIMMs
.
Move the Power Supplies
1.
While pressing the release latch toward the handle, pull
the
handle
to slide the module out of the old chassis.
2.
Slide the power supply into the same bay of the
new
chassis
until it locks (clicks).
3.
remaining
power supply.
Move Optional PCIe Cards
If optional PCIe cards are installed, move them to the new
chassis, placing them in the same slots.
1.
In the new chassis, remove the
slot cover
where the card
is supposed to go, retaining the screw and cover.
2.
In the old chassis, remove and retain the
screw
of the
card being moved.
3.
Grasp the
card
and carefully pull it straight up and out of
the socket making sure the bracket does not catch.
4.
Insert the
card
into the same socket in the new chassis.
Push the card down firmly to ensure a good connection in
the socket.
5.
Use the retained
screw
to secure the card bracket.
6.
Using the retained screw, install the
slot cover
in the old
chassis where the card was removed.
7.
If other PCIe cards exist, repeat
Press
Slot Cover
Screw
