10400469-002
12/2013
©2013 Overland Storage, Inc.
Page 1 of 5
*10400469-002*
SnapScale
™
X4 Node
Chassis Replacement Instructions
This document describes how to swap out the chassis of a
SnapScale X4 node from Overland Storage.
WARNING:
To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working
with the unit.
AVERTISSEMENT:
Pour réduire le risque de choc électrique
ou endommagement de l'équipement, retirez toujours les
cordons électriques en travaillant avec l'appareil.
CAUTION:
While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage
to micro-circuitry or static-sensitive devices.
IMPORTANT: For SnapScale nodes running ROS 3.x,
contact Overland Technical Support before attempting
this procedure. Go to
http://docs.overlandstorage.com/
support
for details.
Prepare the Node
Power Off and Remove
1.
At the Web Management Interface, go to
Storage > Nodes
and click the node name to view the
Node Properties
page.
2.
Click
Remove Node from SnapScale
and confirm.
3.
If the node is running, wait for the
node
to reboot as an
Uninitialized node, and then press the
Power
button on
its left flange to shut it down.
4.
When all the front LEDs are off, disconnect the
power
cords
of the node.
5.
Disconnect all remaining
cables
from the node.
Remove the Bezel
1.
If locked,
unlock
the bezel.
2.
Press the
release button
toward the center and pull the
right side out.
3.
Pull the left
tabs
out of their slots and set the bezel aside.
1Gb Config
Storage
Client
Client
Storage
