Overland Storage SnapSAN VSS, User Manual

Page: 32 / 39

SnapSAN VSS User Guide
10400401-001 08/2012
©2012 Overland Storage, Inc.

A-9
iSM13884: Failed to change copy control state. MV=< aaa...a >, RV=< bbb...b >.
iSM13885: The parameter control file analysis error. (< aaa...a >=< bbb...b >)
iSM20502: Illegal control option.
iSM20503: Environment variable ‘iSMrpl’ is not defined.
iSM20504: Insufficient option. (< aaa…a >)
Term Description
Type ERROR
Explanation A copy control state change failed. aaa...a: MV logical disk name bbb...b: RV logical
disk name
Measure After checking messages output by ControlCommand, check whether there is a mistake
in setup by referring to the “Data Replication User’s Manual (Installation and Operation
Guide for Windows)” or 2.6.2 “For Backup Server Connected to Data Replication RV”.
Term Description
Type ERROR
Explanation [Explanation] Parameter control file analysis failed. aaa...a: Parameter control file key
name bbb...b: Value corresponding to key name
Measure [Measure] After saving the information below, restart the VSS Provider service by
referring to Chapter 3 “Actions When Error Occurs”.
y ControlCommand operation log (iSMrpl.log)
y Event log
Term Description
Type ERROR
Explanation The iSMvss command syntax is invalid.
Measure Specify parameters correctly.
Term Description
Type ERROR
Explanation ControlCommand is not correctly installed.
Measure Install ControlCommand correctly.
Term Description
Type ERROR
Explanation A required iSMvss command option is not specified. aaa…a: Unspecified option
Measure Specify the option correctly.