10400328-001 02/2011
©2011 Overland Storage, Inc.
W
2-2
SnapServer GuardianOS 6.5 Setup Guide
Safety Precautions
Safety Precautions
•
Environmental Conditions
– Make sure the physical environment in which the
unit resides falls within the specifications for your model as described in this guide.
•
Installing the Server or Expansion Array
– During installation, make sure the
unit is always placed on a secure surface capable of supporting its weight.
•
Connecting to the Main Powe
r – Install the unit near an easily accessible power
source. Make sure the source is the proper voltage for your model. Place the power
cords out of the way of traffic; do not place any object over the power cords. If the
unit is taken offline for an extended period, disconnect it from the power source to
avoid possible damage from a power surge.
•
Enclosure Openings
– The openings in the enclosure ensure proper airflow and
prevent overheating; do not cover these openings. Never place liquids on or near the
unit to avoid spillage; liquid entering an enclosure opening could cause fire or
electrical shock.
•
Cleaning the Unit
– Before cleaning the unit, be sure to disconnect all cabling. Do
not use any liquid or spray cleaning agents to clean the unit; use only a damp sheet
or cloth.
•
Servicing the Unit
– If one of the following situations arises, do not attempt a
remedy:
• The power cord or plug is damaged.
• Liquid has penetrated the server.
• The unit has been exposed to moisture.
• The unit continues to operate in an unexpected manner even after suggested
solutions in the Administration Guide have been followed.
• The unit is dropped or otherwise physically damaged.
• The unit has obvious signs of damage.
If one or more of these situations exist, contact Overland Storage technical support.
Basic Hardware Shipped with GuardianOS SnapServers
In addition to the enclosures and disk drives, the SnapServer comes with the
following cables and components:
Component
Description
Power Cables
Three different power cables are provided for each power
supply. These cables comply with power supply requirements
of the following countries:
• United States
• United Kingdom
• Europe
Ethernet Cables
All SnapServers except the SnapServer 110 and 210 have
dual 10/100/1000 Ethernet ports. Two Ethernet cables per
SnapServer are supplied. The SnapServer 110 and 210 have a
single 10/100/1000 Ethernet port, and one Ethernet cable is
supplied.
Note:
Expansion arrays connect to a host SnapServer, not
directly to the network, and thus do not ship with Ethernet
cables.
