NEO 8000e Quick Start Guide
Unpack the Library
10400292-002 05/2013
©2010-13 Overland Storage, Inc.
Page 2 of 4
Figure 2. Unpacking Space Requirements
2.
Remove the
outside
packaging (
Figure 3
).
a.
Cut the
shipping straps
and remove.
b.
Remove the
edge boards
from the top of the box.
c.
Remove the
corner boards
from the sides of the box.
d.
Remove the
top cap
.
e.
Release and remove all of the
plastic retainers
(on
opposite corners).
f.
Remove the two (2) large pieces of
cardboard
surrounding the library.
Figure 3. Library Packaging Components (Rear View)
3.
Remove the
inner
packaging (
Figure 4
).
a.
Holding the RAMP and DOOR boxes, remove the two
(2)
Top Spacers
.
b.
Remove the
RAMP and DOOR boxes
and set them
aside.
c.
Remove the
plastic bag
that covers the library.
Figure 4. Ramp and Door Box Locations
Detach the Pallet
Once the cardboard pieces are removed, you can remove the
hardware that secures the library to the pallet.
1.
Remove the
ramps
from the RAMP box and lay them
down, placing the brackets into the corresponding slots
on the rear of the pallet (
Figure 5
).
Figure 5. Placing the Ramps in Position
Ramp
Floor
Allow at least 10 ft. in
the rear to remove the
library from the pallet
Allow 3 ft.
around
the library
Allow 8 ft.
vertical
clearance
Plastic
Boards
Corner
Shipping
Retainers
Straps
Top Cap
Boards
Edge
RAMP Box
(Library hidden for clarity)
Front
Top
DOOR Box
Spacers
(Library hidden for clarity)
Slots
Ramps
