Overland Data DLT LoaderXpress, Installation And User Manual, Page: 26 / 78

2-6 DLT LoaderXpress™
I
NSTALLATION
*MKYVI'SRJMKYVI7YFQIRY
2) To select a configuration option, press the scroll up (
p
) or scroll down (
q
)
button on the control panel until the arrow on the display is next to the option
you want to change. In this case, choose Set SCSI. Press the Enter
button to
display the choices for that option. The following submenu displays:
*MKYVI'SRJMKYVI7YFQIRY
238) 8EOIEQSQIRXXSPSSOGPSWIP]EXXLIWYFQIRY2SXIXLEXXLI u SRXLIHMWTPE]MWRI\X
XSPMRI ERH XLEXPMRIMWMRHIRXIH8LMWXIPPW]SYXLEXXLMWMWE X[SXMIVIHQIRY 8LI
p ERH q FYXXSRW[SVOSRX[SPIZIPWMRXLMWOMRHSJQIRY[LMGLMWX]TMGEPSJQER]
WYFQIRYWSJXLI'SRJMKYVI1IRY8LIJMVWXPIZIPMWEWJSPPS[W-J]SYTVIWW q XLI u
QSZIWXSPMRI4VIWWMRK q EKEMR[MPPWGVSPPHS[RXS(08&YW-(-J]SYTVIWW p XLI
u QSZIWFEGOXSPMRI
1) Note that the Library SCSI ID is set to 6. Suppose you want to set the DLT1 bus
ID to 5. With the
u
next to line 1, press the
q
repeatedly until the display
scrolls as shown in the following screen:
*MKYVI'SRJMKYVI7YFQIRY(08&YW-(
With the
u
next to line 3, press the Enter button. The
u
moves to line 4, the
↑
appears
at the end of line 1, and the
$
appears at the end of line 4. Now you can use the up
p
and
down
q
arrow buttons to scroll line 4 to display the possible settings. Scroll so that 5
is displayed, then press the Enter button to save the new selection. An
*
appears at the
left of the 5 to indicate that it is the current selection.
1) Press the Escape button repeatedly until the submenu reappears.
2) Repeat this procedure for each configuration option you want to change.
u
Set SCSI
Set Dat Format
Set Library Mode
Set Element Base
$
u Library Parity
✶
Enabled
Library Bus ID:
✶
6
$
u
DLT1 Bus ID:
✶
6
Library Bus ID:
✶
4
$