![background image](http://html1.mh-extra.com/html/over-armour-offroad/tx-stamp-4-fc04/tx-stamp-4-fc04_instructions-for-installation-and-care_1662805007.webp)
9.
The bottom of the Rear Window is held in place by 3 snaps. Photo below shows how this
should go.
TOP CAP
a.
Once you have the Lexan windshield installed on your Stampede use the straps
with a loop sewn on one end. Wrap the looped end around the bar just under the
bottom windshield clamp and then run the other end of the strap through the loop
and pull it tight. The strap with loop should look like the photo below.