36
Operation
Unibox TQ RTL vario
102273680-V01.07.2019
(1)
Remote control
(2)
Control piston
4. Position the cover plate on the “Unibox TQ
RTL vario”.
The cover plate is not contained in
the extent of supply and must be
acquired separately (see
7.5 Room thermostat with
actuator
1.
After completing all building work, remove
the “Unibox TQ RTL vario” protection
cover.
2. Remove the protection cap.
3.
(2)) onto the valve. Pass the cable
through the bore hole in the wall box unit
(see
Further information can be obtained
from the operating instructions
supplied with the actuator.
1
2
Illustr. 11: Install room thermostat with actu-
ator
(1)
Room thermostat
(2)
Actuator
4. Install the room thermostat in accordance
with the corresponding operating instruc
-
tions.
5. Position the cover plate on the “Unibox TQ
RTL vario”.
The cover plate is not contained in
the extent of supply and must be
acquired separately (see
8. Operation
Set the fluid temperature of the surface
temperature balance circuit on the handwheel
inside the “Unibox TQ RTL vario” (see
page 31). Set the room temperature on the
thermostat correspondingly.
Summary of Contents for Unibox TQ RTL vario
