en
75
15 User code
In the
User code
menu, a user code can be entered.
Each number of the 4-digit code must be individually
adjusted and confi rmed. After the last digit has been
confi rmed, the menu automatically jumps to the supe-
rior menu level.
To access the menu areas of the expert level, the ex-
pert user code must be entered:
Expert user code:
2962
For safety reasons, the user code should generally
be set to the customer code before the controller is
handed to the customer!
Customer user code:
0000
Adjustment channel
Description
Adjustment range / selection
Factory setting
Module 1 ... 5
Registering external modules
-
-
In- / Outputs / Modules
16 In- / Outputs
In the
In- / Outputs
menu, external modules can be
registered, sensor offsets can be adjusted and relay
outputs can be confi gured.
16.1 Modules
In this menu, up to 5 external modules can be reg-
istered.
All modules connected and acknowledged by the con-
troller are available.
Î
To register a module, select the corresponding
menu item by pressing button
5
The checkbox indicates the selection. If a module is
registered, all its sensor inputs and relay outputs will
be available in the corresponding controller menus.