10/36
Operation fundamentals
"Regtronic RD-W"
Illustr. 5
Status page
S9
Outside temperature sensor
(see installation instructions 5.5)
S5
Flow temperature sensor (from heat generator)
(see installation instructions
5.4.2 and 5.4.3)
S4
Storage cylinder temperature sensor (upper)
(see installation instructions 5.2)
S2
Storage cylinder temperature sensor (lower)
(see installation instructions 5.2)
S7
Differential pressure sensor (in the riser)
(see installation instructions 5.1.4)
S10 Riser temperature sensor (supply)
(see installation instructions 5.1.3)
S11 Riser temperature sensor (return)
(see installation instructions 5.1.3)
Info
Heat generator or loading pump (ON/OFF)
(see installation instructions 5.3.2 or
5.4.3)
Outputs (A1...16)
(see installation instructions doc. no. 134209380) used by the
controller software are displayed here; outputs which are currently switched (for
instance for the pump) are highlighted in green.
A3
Mixing valve opens
(see installation instructions 5.1.1)
A4
Mixing valve closes
(see installation instructions 5.1.1)
A5
Heat generator / Loading pump volt free
(see installations instructions
5.3.2 and 5.4.3)
A8
Riser pump 230 V
(see installation instructions 5.1.2)
A9
Loading pump 230 V
(see installation instructions 5.4.1, 5.4.2 and 5.4.3)
A13
Heat generator 0-10 V
(see installation instructions 5.3.1)
A14
Riser pump 0-10 V
(see installation instructions 5.1.2)
A15
Loading pump 0-10 V
(see installation instructions
5.4.2 and 5.4.3)
A16
Supply voltage
5 V for differential pressure sensor
(see installation instructions 5.1.4)
Setting date and time
via direct selection (see
4.3.2)
S9
S5
S4
S2
S7
S10
S11
Info
OFF
Mo 20.06.2016 10:36
75.0ºC
20.0ºC
0.60 bar
70.0ºC
68.0ºC
Summary of Contents for Regtronic RD-W
Page 35: ......