23
Connect collectors whilst holding them firmly to avoid damage to
the collector connection. ATTENTION: Risk of scalding during sun-
shine!
Connect collectors to the solar circuit. Check all collector connec-
tions when carrying out leakage test.
Insert solar sensor into the sleeve. Close opening with the help of
the rubber plug which is slipped onto the cable. Feed cable into the
roof.
Line up the wooden support against the collector and fix with the
help of dry wall screws 4 x 35 and 5 x 120.
7.
8.
9.
10.
Insert lower metal integration sheet into the lower collector frame
groove (see enlarged view). The outer corners have to engage into
the outer frame groove.
Fix lower metal sheets for roof covering at the marked position in
the collector frame with two drilling screws 4.2 x 13 (with washer).
11.
12.
