oventrop Multidis SF, Operating Instructions Manual

Page: 17 / 40

Multidis SF
General information
1. General information
The original operating instructions are written
in German.
The operating instructions in other languages
have been translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the
Multidis SF heating circuit distributor/collector
in the versions for 2 to 12 heating/cooling
circuits.
1.2 Extent of supply
Please check your delivery for any damage
caused during transit and for completeness.
Extent of supply:
•
Flow distributor
•
Return collector
•
2 brackets
•
4 screws
•
4 dowels
•
2 ring gaskets for the connection between
the heating circuit distributor/collector
and the ball valve
•
Stickers for circuit identification
•
Operating instructions
1.3 Contact
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com
Technical service
Phone: +49 (0) 29 62 82-234
1.4 Declaration of conformity
Oventrop GmbH & Co. KG hereby declares
that this product
has been manufactured in
compliance with the essential requirements
and the relevant provisions of the relevant EU
directives.
The declaration of conformity can be obtained
from the manufacturer.
1.5 Symbols used
Highlights important information and
further additions.
f
Action required
•
List
1.
2.
Fixed order. Steps 1 to X.
Z
Result of action
2. Safety-related information
2.1 Correct use
Operational safety is only guaranteed if the
product is used as intended.
The Multidis SF heating circuit distributor/
collector serves the central distribution of the
heating/cooling water to the different circuits
of a dwelling.
Any use beyond and/or different from this is
considered improper use.
Claims of any kind against the manufacturer
and/or his authorised representatives for
damage resulting from improper use cannot
be recognised.
Proper use also includes correct compliance
with these instructions.
17 140655281-V01.07.2021