background image

Form No. OVMILOM-0718

10

OPERATION

  5.  Open the oven door. Using a paddle, pan gripper, or other 

utensil, remove the cooked food product. 

CAUTION! 

BURN HAZARD—Always use a paddle, pan gripper, 
or other utensil to load and unload food product.

 

•.  The touchscreen will return to the Recipes screen.

NOTE: Touch

on the “DONE” screen to return to the 

Recipes screen without opening the oven door.

Standby Shutdown

Use the following procedure to put each oven chamber into 
standby shutdown during extended periods of non-use.

  1. Touch

on the touchscreen to shut down operation and 

put the oven in standby.

 

•  The elements will shut off, and the Cooling screen will 

appear on the touchscreen,

 

•  The air blowers and cooling fans will continue to operate 

until the oven chamber temperature drops below 140°F 
(60°C).

 

•  After the chambers are cool, the oven status will read 

“Oven Off”. After a period of time, the touchscreen will 
darken to a screen saver.

Shutdown

Use the following procedure to disconnect the oven from power 
for cleaning and maintenance as well as long term shutdown.

  1. Touch

on the touchscreen to shut down operation and 

put the oven in standby. Cooling fans will operate until the 
oven chamber temperature drops below 140°F (60°C).

Upper

Chamber

GFCI

Switch

Lower

Chamber

GFCI

Switch

Control

Reset

Switches

“Off”

CAUTION

Do not turn off GFCI switches 
or unplug unit immediately after 
use. Internal fans must cool oven 
to avoid damage to electrical 
components.

  2.  After the cooling fans shut off:

 

a. Move both GFCI switches 

on the back of the oven to 
the 

O

 (Off) position.

 

b. Move both Control Reset switches to the “Off” position.

 

c. Unplug the power cord.

Programming Categories/Recipes

Use the following procedures to edit, create, or delete 
categories and recipes. These procedures require access 
to password-protected screens and should be performed by 

authorized personnel only.

NOTE:  The USB port allows the uploading of pre-programmed 

recipes from an external USB drive. Refer to the 
“Uploading from a USB Drive” procedure in this section 
for details.

  1.  From the Categories screen, touch

 

• A password keypad will appear on the touchscreen.

  2.  Input the password “12345” , and touch

 

• The Settings screen will appear on the touchscreen.

 

Touch to return to

Categories screen.

Touch desired icon to

view/edit/create

corresponding setting.

Settings Screen

  3.  Touch either EDIT CATEGORIES or EDIT RECIPES on 

the Settings screen, depending on the desired function. 
Then, refer to the appropriate procedure in this section.

Summary of Contents for Double MiLO2-16





















Reviews: