background image

Form No. OVCM-0720

10

OPERATION

Programming Conveyor Settings

Use the following procedure to edit or create conveyor settings. 

This procedure requires access to password-protected screens 

and should be performed by authorized personnel only.

NOTE: The USB port allows the uploading of pre-programmed 

conveyor settings from an external USB drive. Refer 

to the “Uploading from a USB Drive” procedure in this 

section for details.

  1.  From the Select Desired Item screen, touch the “up” arrow.
 

•  A password keypad will appear on the touchscreen.

  2.  Input the password using the keypad, and touch ENTER. 
 

•  The Admin Mode screen will appear on the touchscreen.

Recipes

Back

USB

Logs

Maint

ADMIN MODE

ADMIN MODE

465 F

465 F

Touch to return to

Select Desired Item

screen.

Touch to access

Recipe Development

screen.

Touch to access

Maintenance Mode

screen.

Touch to access

USB Functions

screen.

Touch to access

Logs Detail

screen.

Admin Mode Screen

  3. Touch RECIPES to access the Recipe Development 

screen.

 

a. The Recipe Development screen will appear. This 

screen will look like the Select Desired Item screen.

Touch an existing conveyor

setting to edit.

Touch to scroll to next screen and view

additional conveyor settings or select empty

box to create a new conveyor setting.

Touch to return to Admin Mode screen.

Recipe Development Screen—Single Belt Model

  4.  Edit or create a conveyor setting.
 • 

To edit

 an existing conveyor setting, touch the desired 

setting.

 • 

To create

 a new conveyor setting, touch an empty box. 

If no empty boxes are available, touch the “down” arrow 

to scroll to the next screen.

 

•  The Edit Preset Data screen will appear.

Single Belt

Split Belt

Touch to save settings and return to

Recipe Development screen.

Touch to exit without

saving and return to

Recipe Development

screen.

Edit Preset Data Screens

  5.  Touch each “setting” box on the Edit Preset Data screen 

to edit the corresponding setting. Common settings 

include item name, top blower percentage, bottom blower 

percentage, and cook temperature. For cook duration: 

single belt models will have a single COOK DURATION 

box; split belt models will have a FRONT BELT box and a 

BACK BELT box.

 

•  Touching a “setting” box will bring up a keypad specific 

to the setting. Enter the desired value using the keypad, 

then touch ENTER to return to the Edit Recipe Settings 

screen. 

 

•  Menu item names can have up to 16 characters.

  6.  When conveyor setting programming is complete, touch 

SAVE AND EXIT on the Edit Preset Data screen.

 

•  The Recipe Development screen will appear. 

 

•  To program additional menu items, repeat steps 4 and 5 

of this procedure.

  7.  If all programming is complete, touch the “up” arrow on the 

first (screen 1 of 9) Recipe Development screen to return 

to the Admin Mode screen.

Summary of Contents for Conveyor C2000 Series

















Reviews: