USING THE FOOD PROCESSOR
Do not attempt to chop ice in this food processor; it will damage the bowl, dull the
Chopping Blade. Your processor is not suitable for crushing or grinding coffee beans,
or converting granulated sugar to caster sugar. When adding almond essence or
flavoring to mixtures avoid contact with the plastic as this may result in permanent
marking.
1.
Remove all packaging, Take care of the knife blades as they are very sharp.
These covers should be discarded as they are to protect the blade.
2.
Wash the parts see “cleaning”.
3.
Place the food processor base on a dry, level countertop with the controls facing
you. Do not plug the unit in until it is fully assembled.
4.
Fit the detachable drive shaft (2) onto the power unit (1).
5.
With the bowl on the base, use the handle to turn the work bowl
counterclockwise to lock it onto the housing base.
6.
Fit an attachment over the drive shaft (2).
NOTE:
Always fit the bowl and attachment onto the machine before adding ingredients.
7.
Fit the lid ensuring the top of the drive shaft (2) locates into the center of the lid.
NOTE:
Do not use the lid to operate the processor; always use the on/off control.
8.
Switch on and select a speed.
NOTE:
The processor won't work if the bowl and lid are fitted incorrectly.
9.
Use the pulse for short bursts. The pulse will operate for as long as the control
is held in position.
10.
Reverse the above procedure to remove the lid, attachments and bowl.
NOTE:
Always switch off before removing the lid.
7
ovente.com
Summary of Contents for PF6007 Series
Page 3: ......
