PAGE 13
#2
FIXED PANEL AND SUPPORT BAR INSTALLATION
C
B
C
P
C
C
Q
B
A
A. Insert the fixed panel bottom seal strip (P) on the base of the fixed panel (C). Cut the surplus part with a cutter, about 24 mm (15/16 in) from the panel’s
edge.
B. Insert the fixed panel (C) into the wall track (B). Do not fully tighten it as further adjustments may be required.
Note: The wall track (B) allows you to adjust the position of the fixed panel (C). Adjusting the depth and/or giving the glass panel a slight angle allows
for precise alignment with the door.
C. Smoothly slide the sliding door guide (Q) at the bottom of the fixed panel (C), but without securing it.
24 mm [15/16 in]
