7
BASE AND WALL PANELS INSTALLATION (OPTIONAL)
1
2
ø1/8”
3mm
GG
1.
Install the 2 wall panels (E) and seal strip (O) together. Secure the 2 walls with wing nut kit (GG). Add
silicone at the junction of the 2 wall panels (E).
2.
Place the wall panels on the base, drill holes through the bottom of the wall into the base with a ø1/8” (3mm)
drill bit and secure with screw (AA).
•
This instruction is drawn up for an opening from right to left (see illustration A).
•
For an installation from left to right (see illustration B), use the same instructions, but switch around the
panels: mirror effect.
SHOWER REVERSIBILITY
A
B
Install the shower head on the door’s side! This will reduce the risk of leaking.
O
AA
E
E
