9
1.
Level the tracks (B) and mark the track holes’ positions.
2.
Remove tracks and drill pilot holes in the marked locations with a Φ8mm (5/16in) drill bit.
3.
Insert the wall anchors (AA) using a rubber mallet until the wall anchors are flush with the wall.
4.
Replace and secure the metal tracks (B) with screws (BB). Do not overtighten.
WALL TRACK INSTALLATION
Φ 8mm
5/16in
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
AA
2
3
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
24mm 15/16in
BB
4
B
1
17mm
11/16in
