Ovation C-805FC User Manual Rev. 3
O
PERATION
Configuration (DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX Personalities
This setting allows you to choose a particular DMX personality.
1.
Go to the
Personality
main level.
2.
Choose
1-Cell
or
2-Cell
mode.
3.
Select the desired personality (see
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1.
Select a DMX personality as shown in
2.
Set the running mode:
a.
Go to the
Master/Slave
main level
b.
Select the
Master
programming level
3.
Set the starting address:
a.
Go to
Start Address
main level.
b.
Select the starting address (
001
–
512
).
The highest recommended starting address for each DMX mode is as follows:
•
See the
section for the highest starting address you can select for
each personality.
•
Make sure that the starting addresses on the various products do not overlap due
to the new personality setting.
DMX Personality
1-Cell
2-Cell
DMX-VCW-CCT 510
N/A
RGB 510
507
RGBA 509
505
RGBAL 508
503
RGB EXT
505
498
RGBA EXT
504
496
RGBAL EXT
503
494
RGBAL Fine
503
493
RGBAL FULL
496
482
Summary of Contents for C-805FC
Page 1: ...User Manual...
