Ovation BioNatural Pipette – Multichannel Operator’s Guide
A - 2
Proper use of Ovation pipettes as specified in this manual will ensure safe operation.
However, please be aware of the following situations that can damage the device or cause
serious personal injury.
WARNING!
Connect power supply to a compatible power source. Refer to the voltage
configurations shown below. Use of an incompatible power source can cause shock and
fire hazard.
WARNING!
Unplug power supply before cleaning the exterior. The power supply should
be positioned for easy access so in case of emergency it can be quickly disconnected from
the pipette. Fluid contact with internal components can cause shock hazard.
WARNING!
If the pipette is used in a manner not specified, the protections provided may
be impaired.
CAUTION!
Use only the power supply and batteries provided by VistaLab Technologies,
Inc. Use of other power supplies can damage the pipette and invalidate the warranty.
CAUTION!
Do not immerse pipette in liquid. Fluid contact with internal components can
damage the electronics and display.
CAUTION!
Pipette is not intended for autoclaving. Autoclaving will damage the electronics
and display.
CAUTION!
Use only cleaning solutions specified in this manual to clean the exterior of the
pipette. Use of other solvents can damage the exterior surface and keypad.
Operating Temperature & Environment Conditions
Indoor use / Pollution Degree 2
Altitude up to 2000m
Temperature Range: 15˚–35˚C
Relative Humidity Range, non-condensing: 10%–85%
Atmospheric Pressure: 70–106kPa
Power Supply and Battery Specifications
Use only the power supply and batteries provided by VistaLab Technologies, Inc. Use of
other power supplies can damage the pipette and invalidate the warranty.
Mains voltage fluctuation
±10%
Direct Plug in class II power supply
Installation class 2 for direct plug in power supply
Ingress protection normal (IPX0)
Battery: lithium ion
Power Supply:
Catalog #: 9060-9005 – Universal Power Supply, 100-240VAC, 50-60Hz.
(Equivalent to 9060-9001,
-9002, -9003 & -9004)
Pipette Body Chemical Compatibility
Water, diluted ethanol or isopropanol, diluted bleach. For more information about chemical
compatibility with internal seals or pipette tips, see the documentation library in the support
area of our web site – www.vistalab.com.
Hazards and
Precautions
!
!
!
!
Symbols are visible on equipment:
Symbol
Description
Alternating current
Direct current
Attention - consult documents
