E-888-5-E
1. BEFORE YOU BEGIN
Every OVAL product is thoroughly tested and inspected before shipment from our factory.
When received, its appearance should be inspected for possible damage by rough handling during
transit. First of all, thoroughly read the handling precautions described in this section. For topics other
than those covered in this section, refer to the respective sections of this manual.
If at any time in the future you seek our assistance, contact the nearest sales office in your area.
1.1 Confirming the Nameplate
The instrument is adjusted to individual specifications
before shipment from our factory. Model number
appears on the nameplate attached to the top of
the housing.
Make sure to see that the instrument you received
conforms to the General Specifications and the
Product Code Explanation.
◆
When you inquire, supply complete informa-
tion as to the product name, model number,
product number, ratings, and other pertinent
information.
1.2 Transportation Precautions
() In order to safeguard against damage during transit, transport your instrument to the installation
location in the original package used for shipment from the factory if possible.
() Use care to avoid impact shocks to the instrument during transit.
1.3 Storage Precautions
If the instrument upon receipt is to be stored for extended periods of time before installation, unexpected
problems could arise. If such is the case, the following considerations should be taken:
() The instrument can best be stored in the original package used for transit from the factory.
() The place of storage should meet the following requirements:
☆
Free from rain and water
☆
Free from vibration and impact shocks
☆
With minimal temperature and humidity variation (around 5
°
C and 5% R.H.)
Fig. . Nameplate Location
Nameplate
(model number)
※
※
EL00 is the
generic desig-
nation of the
EL00 series
computers.
