45
is widely accepted by most of pan-tilt pan-tilt
camera cradles.
You have also input pan-tilt camera cradle’s address
code in ‘Address’ field. This code must be identical to
pan-tilt camera cradle’s address code.
Use Custom
Protocol
When the pan-tilt camera cradle does not support
Pelco-D protocol, you can define a protocol’s detail
by this function.
Please refer to pan-tilt camera cradle’s user manual
to define the protocol.
-
Baud Rate: Select data baud rate of RS-485
interface that pan-tilt camera cradle will
accept. When the length of RS-485 connection
is very long (longer than 200M), it’s not
recommended to use high speed connection
(greater than 2400bps).
-
Data Bits: Select data bits of RS-485
connection.
-
Parity: Select parity bit: odd, even, or space.
-
Stop Bit: Select stop bit: 1 or 2.
-
Home/Up/Down/Left/Right: Input the
command string used to move pan-tilt camera
cradle to home or up/down/left/right
position. You can click ‘Test’ button to send
command string for testing.
-
Command 1 ~ 5: You can define extra pan-tilt
camera cradle control strings here by giving it
a name (Command Name) and command
string (Hexadecimal Message). You can also
click ‘Test’ button to send command string for
testing.
When you finish with above settings, click ‘Apply’ button to save
changes.
