User Manual of Network Fisheye Camera
73
settings on the
Motion Detection
and
Alarm Input Settings
interfaces.
Please refer to
Section 5.6.1
and
Section 5.6.3
for detailed information
.
Record Triggered by Line Crossing Detection
If you select
Line Crossing Detection
, the video will be recorded when the
line crossing event is detected.
Besides configuring the recording schedule, you have to set the detection
line and check the checkbox of
Trigger Channel
in the
Linkage Method
of
Line Crossing Detection Settings interface. For detailed information, please
refer to
Section 5.6.6 Configuring Line Crossing Detection.
Record Triggered by Intrusion Detection
If you select
Intrusion Detection
, the video will be recorded when the
intrusion event is detected.
Besides configuring the recording schedule, you have to set the intrusion
detection area and check the checkbox of
Trigger Channel
in the
Linkage
Method
of Intrusion Detection Settings interface. For detailed information,
please refer to
Section 5.6.7 Configuring Intrusion Detection.
(3)
(Optional) Check the checkbox of
Select All
and click
Copy
to copy settings of
this day to the whole week. You can also check any of the checkboxes before
the date and click
Copy
.
(4)
Click
OK
to save the settings and exit.
6.
Click
Save
to save the settings.
6.3
Configuring Snapshot Settings
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The
captured picture can be stored in the SD card (if supported) or in the network disk
(For details, please refer to
Section 6.1
Configuring NAS Settings
). The captured
pictures can also be uploaded to a FTP server.
Timing Snapshot
