Outwell Annatto, Instruction Manual

Page: 2 / 17

2 3
UK: INSTRUCTION MANUAL UK: INSTRUCTION MANUAL
Read these instructions for use carefully so as to familiarize yourself
with the appliance before connecting it to its gas cartridge.
Keep these instructions for future reference.
TECHNICAL DATA:
• Make sure that the appliance has been assembled correctly before using it
• Open the lid (4) and attach both side windshield protections (1) to the lid. Make sure to connect
the two small hooks on the inside of the lid properly to the small connection holes molded on each
windshield (1).
• Take the gas hose (11) with the connector (12) and push the female valve gently but firmly into the
inlet before screwing the female threaded collar tightly to the inlet of the appliance.
Applicable for Jimbu Stove:
• Make sure to place the grill grate (3) in the molded holes on the right-hand side of the appliance so it
fits properly. It should not be loose.
• Place the grate (2) into the molded holes on the left-hand side of the appliance.
• Slide in the drip tray (9) from the back and under the appliance.
Applicable for Olida & Annatto Stove:
• Place the grate (2) into the molded holes on the appliance.
2. OPERATION
• CAUTION: Use outdoors only.
• When in use the appliance should be placed in a location that is well-ventilated and protects it from
direct draughts.
• Accessible parts may be very hot. Use gloves and sturdy long barbecue tools when cooking.
• Keep young children away from the appliance.
• Do not misuse the appliance or use it for other purposes than what it is intended for.
• Do not modify any parts of the appliance.
• Do not try to repair the appliance. If you are not able to rectify any fault following these instructions,
contact the dealer or Outwell Customer Service (contact details below).
• Never leave the appliance unattended when lit.
• Handle the appliance with care. Make sure not to drop it. Do not move the appliance during use.
• Check that seals are in place and in good condition before connecting to the gas cartridge.
Do not use the appliance if a seal is damaged or worn.
10.
14.
14.
12.
8.
1.
3.
11.
2.
5.
9.
7.
13.
6.
1.
1. Windshield protection
2. Grate for pots or pans
3. Grill grate with non-stick coating
(Only applicable for Jimbu Stove / 650800-218-BT)
4. Appliance lid
5. Individually controlled burner knob
6. Individually controlled burner knob
7. Auto piezo ignition
8. Inlet for connector / gas hose
9. Drip tray (only applicable for Jimbu Stove / 650800-218-BT)
10. Easy-close latch
11. Gas hose
12. Connector with female valve and female thread
13. Gas valve adaptor with tap
14. Connection points
1. ASSEMBLY
Appliance
name:
Jimbu Stove
(650800/218-BT)
Olida Stove
(650604/220V1-BT)
Annatto Stove
(650804/204PI-BT)
Type of gas: Butane-propane mixture
Category: Direct pressure
Type of gas
cartridge:
All 3 appliances should only be used with Primus 220693, 220794
or 220294 Butane-propane mixture gas cartridges compliant with EN 417.
Injector size: Ø 0.30 mm (Burner) &
Ø 0.20 mm (Grill)
Ø 0.28 mm Ø 0.30 mm
Nominal rate
in g/h and
in kW (Hs):
3.5 kW (255 g/h) (Burner) &
1.5 kW (109 g/h) (Grill)
2 x 3.0 kW (218g/h) 2 x 3.5 kW (255 g/h)
4.
Seal - inlet for connector (8)
Seals - gas hose (11)