background image

This movable appliance is designed for use in gardens, and can be used indoor

and outdoor. The warranty will not apply to appliances used for professional

usage.

Although the heater may be used outdoors, the main plug must only

be connected to the supply indoors.

This movable appliance is designed for use in gardens, and can be used indoor

and outdoor. The warranty will not apply to appliances used for professional

usage.

Although the heater may be used outdoors, the main plug must only

be connected to the supply indoors.

Children or person who lack the knowledge or experience to use the device or

whose physical,sensory or intellectued capacities are limited must never be

allowed to use the device without supervision or instruction by a person

responsible for their safety. Child are never be allowed to play with the device.

This appliance is not intended for use by persons(including children) with

reduced physical,sensory or metal capabilities, or lack of experience and

knowledge, unless they have been given supervisions or instruction

concerning use of the appliance by a person responsible for the safety.

Children should be supervised to ensure that they do not play with te

appliance.

2-VOLTAGE

Before using the appliance at the first time, ensure that your mains voltage

corresponds to voltage indicated on the appliance.

It is a class I appliance and

must be earthed.

3-SAFETY

CAUTION: Before fitting or removing the appliance, ensure that the
heater's power line supplying the heater is disconnected. Check that the
power line is connected to a 30mA differential circuit breaker.

This appliance is designed for use in gardens

When it is switch on, an electrical heating appliance reaches very high

temperature libel to cause burns. Make sure that all other users are aware

of the risks.

If you have any doubts concerning installation possibilities for this heater,

please consult a qualified electrician.

Children, the elderly and the infirm may not always be aware of the

danger involved in using electrical appliances. Never allow this appliance

to be used without supervision.

The appliance must be positioned so that the plug is accessible.

If the supply cord is damaged, it must be replaced by the manufacturer or

its service agent or similar qualified person in order to avoid a hazard

Summary of Contents for YP-2000B








Reviews: