Outsunny SUNDEAR GS 1500 Assembly & Operation Instructions Download Page 7

 

Page 

7

 of 

 

 

TROUBLESHOOTING 

1.   Check if the power cord is plugged into an electrical outlet, if not, plug in. 

2.   Check if electricity to the main fuse is working. 

CLEANING AND MAINTENANCE  

Regular and careful cleaning helps your infrared heater operate efficiently for many trouble-free 
years. To clean your heater, follow steps below: 

 

1.   Unplug the power cord for your safety before cleaning your appliance. 

2.   Make sure the heater is cool before continuing. 

3.   To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use 

a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. (

CAUTION

DO

 

NOT

 allow liquids to enter the heater). 

4.  

DO NOT

 use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean 

the heater. This may cause damage or deterioration to the surface of the heater. 

5.  

DO NOT

 immerse the heater in water. 

6.   Wait until the heater is completely dry before use. 

Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt build up. 
Use packaging carton to store. 

 

Attention: 

 

1.  Always disconnect the heater from the electricity supply and allow it to cool before attempting 

to work on it. 

2.  If the heater has collected dust or dirt inside the unit or around the heating element, have the 

unit cleaned by a qualified service agent.  Do not operate the heater in this condition. 

3.  The only maintenance required is cleaning of the external surfaces of the heater. 

4.  Do not touch the heating element with bare fingers, as residue from your hand could affect the 

life of the lamp. If it is accidentally touched, remove the finger marks with a soft cloth moistened 
with mentholated spirit or alcohol. 

5.  Do not attempt to repair or adjust any electrical or mechanical functions on this heater. 

6.  The heater contains no user serviceable parts. Should the product suffer damage or 

breakdown, it must be returned to the manufacturer or its service agent. 

7.  Damaged supply cords to be replaced by the manufacturer, service agent or similarly qualified 

person to avoid hazard. 

RECYCLING 

 

At the end of the electrical 

product’s useful life

it should not be disposed of with household waste.  

Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice 
in your country. 

Summary of Contents for SUNDEAR GS 1500









Reviews: