background image

Refrigerator  Instruction 

   

Page 6 of 9 

 

——Press the 

Battery Protection

 button to set the voltage the fridge cuts out at, 

LOW, MED or HIGH. The LCD light will show which voltage is selected. 

——Press the 

  button ,then the light of the left and right bin turn on and the 

LCD will display, Press the 

  button again, the light turn off; If forget to 

turn off the right, the light will be turn off automatically in 3 minuters later. 

——The left bin can be set as cold or warmer than the right bin. 

——If the power supply is cut off, the refrigerator will switch on automatically when the 

energy is on again.   

 

4. 

Cleaning and maintenance 

——Be sure to cut off all input power before Cleaning appliance.

 

——Clean the appliance inside and out with a damp cloth for every week. If it is dirty, 

using sodium bicarbonate dissolved in lukewarm water, and then clean it.   

——Never use abrasive products, detergents or soap. After washing, rinse with clean 

water and dry carefully. Do not leave the refrigerator shut off, warn inside, with 

food inside or lid closed.   

——Never clean the appliance under running water or in dish water. Do not use 

abrasive cleaning agents or hard objects during cleaning as these can damage 

the refrigerator.   

 

5. 

Troubleshooting 

■The appliance is out of work   

——Check the power supply   

Summary of Contents for C00-017










Reviews: