Assembly Instruction:
Estimated Assembly Time:15 Minutes
DO NOT over tighten the hardware.
Step 1) Attach Legs (E) to Upper
Support Ring-8 Holes (D1) by
using Bolts (I) and Nut (J).Do not
fully tighten at this point.
Step 2) Attach and tighten
Bottom Support Ring-4 Holes
(D2) to each Legs (E) by using
Bolts( I ).
Now fully tighten all bolts.
Step 3) Assemble the Mesh Lid(A)
by using Lid Ring(H) Place the Fire
Bowl (C) on the assembled base
and put the Log Grate (B) in the
fire bowl.Attach the Mesh Lid on
the Fire Bowl.
WARNING!
•
The use of alcohol, prescription or non-prescription drugs may impair
the ability to properly assemble or safely operate this fire pit.
•
When using this fire pit, exercise the same precautions you would
with any open fire.
•
Do not use this fire pit for indoor heating. Toxic carbon monoxide
fumes can accumulate and cause asphyxiation or death.
