12
Step 2. Installing the brackets
Drill the hole according to the line which was draw up in step 1 by 14mm wall drill, please pay attention to the deep of hole
that should not be less than 9cm. Making the expansion bolt through the bracket(keep the barbed side up), hitting the
expansion bolt into the hole with tighten by wrench. As shown in the figure below:
5/8inch
Step 3: Installing the awning:
Install the awning into the brackets, and fasten the bolts of the brackets.
As shown in the figure below:
Step 4
：
Open the arms
After locking the awning, please close the awning by hand crank, then cut the strings which raping the
arms.
Pay attention, the strings can't be cut before !!
Summary of Contents for 840-149GN
Page 3: ...3 Description of Awning...
Page 18: ...BESCHREIBUNG DER MARKISE...
