Outsight creamsource MICRO, User Manual

Page: 18 / 36

16
7.4 ranDOM FlasHes
Creates a random pattern of flashes that can be adjusted to look similar to
lightning, welding or other flashing effects.
The ON/OFF button can be used to turn the effect on or off, and the FLASH
button can be used to create ‘bursts’ of random flashing.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Maximum flash brightness
FREQUENCY 1-50Hz Frequency of random effect
LENGTH 2-200mS Maximum length of any flash
VARIATION 0-100% Amount the brightness is allowed to
vary from the BRIGHTNESS setting.
0 = No Variation (flashes will all be
same brightness). 100 = Flashes can
be any brightness
COLOUR TEMP 2700-6500K Approximate colour temperature
7.5 TIMeD FlasH
Used to create ashes of a defined duration, similar to a Studio Strobe light. A
modelling level can also be set.
The flash can be triggered by pressing the FLASH button, or if ‘External Triggering’
is enabled it can be triggered from an external source such as a camera hot shoe.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Modeling light output level
FLASH LEVEL 0-100% Light output when FLASH triggered
FLASH TEMP 1/5 th -
1/5000
th
sec
Duration the light is flashed ON for
COLOUR TEMP 2700-6500K Approximate colour temperature
CS_micro_UG_5PRINT.indd 16 11/08/17 1:12 am