Outsight Creamsource Micro+C, User Manual

Page: 25 / 40

23
7.2 DUAL LEVEL
Dual level allows two light levels to be set. This is useful if you need a modeling
light level, but then want to flash brighter for a lightning or strobe effect.
Use the ON/OFF button to turn on or off the modeling light, and FLASH button
to flash up to the Flash Level setting.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Modeling light output level
FLASH LEVEL 1-50Hz Light output when FLASH button
pressed
7.3 STROBE AND FLASHES
The ON/OFF button can be used to turn the effect on or off, and the FLASH
button can be used to create ‘bursts’ of strobe
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Strobe brightness level
FREQUENCY 1-50Hz Frequency of strobe effect
DUTY CYCLE 1-99% Duty cycle of strobe effect - the ratio
between light OFF and ON times
7.4 RANDOM FLASHES
Creates a random pattern of flashes that can be adjusted to look similar to
lightning, welding or other flashing effects.
The ON/OFF button can be used to turn the effect on or off, and the FLASH
button can be used to create ‘bursts’ of random flashing.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Maximum flash brightness
FREQUENCY 1-50Hz Frequency of random effect
LENGTH 2-200mS Maximum length of any flash
VARIATION 0-100% Amount the brightness is allowed to
vary from the BRIGHTNESS setting.
0 = No Variation (flashes will all be
same brightness). 100 = Flashes can
be any brightness