21
6.5.4 Crossfade CCT-GEL
Use the
NEXT
button to toggle through the Normal CCT settings and the
Gel settings to define you’re 2 colours. Use the
NEXT
button to toggle
to the CROSSFADE heading and use the control wheel to smoothly fade
between the 2 colours. At 0 CROSSFADE, your Normal CCT colour selection
is output and at 100 CROSSFADE your Gel colour selection is output.
6.7. Colour Mode – BUMP COLOUR
‘Bump Colour’ allows you to modify any colour (be that a White, Hue/Sat or Gel)
by adjusting the colour along any of the axis: Red/ Cyan, Green/ Magenta or Blue/
Yellow. The saturation can also be increased or decreased. Colour bumps are
saved and restored during power down but will be removed if the colour mode
is changed or if a new Gel is selected. As with all settings, you can also control
brightness, add effects & store as a User Preset..
6.7.1 BUMP COLOUR: Accessing Colour Bump
The ‘Bump Colour’ menu can also be accessed at any time by holding down
the
MENU
button for two seconds. When the bump is enabled,
is
shown on the top left of the screen. To exit the colour bump screen, tap the
MENU
button once.
6.7.2 BUMP COLOUR: Adjust Saturation
To adjust the Saturation, press the
NEXT
button until the SATURATION
heading is displayed. Then use the control wheel to smoothly increase or
decrease saturation of the Hue. To reset the bump to 0, hold the ON/OFF
button (whilst in the ‘Bump Colour’ screen).
6.7.3 BUMP COLOUR: Adjust Colour along axis
To adjust the Red/ Cyan, Green/ Magenta or Blue/ Yellow axis press the
NEXT
button to toggle through until the axis you want to adjust is displayed. Then use
the control wheel to smoothly adjust the colour mix along that axis. To reset the
bump to 0, hold the ON/OFF button (whilst in the ‘Bump Colour’ screen).
6.8. Colour Mode – REMOVE BUMP
Select this menu item to remove the Colour Bump. Alternatively, the Colour
Bump can be removed by holding down the
MENU
button for two seconds
from within the colour bump menu.
FX
STROBE
*
DMX
EXT
O.O%
Summary of Contents for Creamsource Micro+C
