6
4-1. ADD FORM
KEY IN FILE NAME
L01
When ADD FORM is chosen, KP-180 shows right screen and asks
you to input the name of the file you want to download.
When name is keyed in, LCD shows right screen.
Ready for loading
As the cable is connected, run download program by following statement under DOS prompt.
LKP180 TEST.CMD /C:1
??
TEST.CMD is the download file.
??
/C:1 means serial port COM 1 of the PC computer; likewise, C:2 must be chosen when the
download cable is connected to serial port COM2 of the PC computer.
When download is finished, LCD shows right screen and begins to
write what it downloaded into memory card.
Write to memory
Please wait
Form loaded
Successfully
When writing is finished, LCD shows right screen, and goes back to
select menu of DOWNLOAD MODE in about 1 second.
Download message:
Buffer is full
Download incomplete
There is no vacancy in memory card for new forms.
Can not download
more file
10 forms have been stored in, and there is no more form to be accepted.
Too many variables
in label format
KP-180 allows 20 variables at most. LCD will go back to previous screen
in about 1 second, and ask you to try another form.
Same name in keybo
Keyin name again
Your chosen name has been existed in memory. LCD will go back to
previous screen in about 1 second, and ask you to try another name.
File larger than 1K
Download incomplete
File is too large to be downloaded. LCD will go Download mode menu in
about 1 second, and ask you to download another form.
Process aborted
Download incomplete
During process of downloading, whenever EXIT is pressed, LCD shows the
message and goes to Download mode menu in about 1 second.
4-2. DELETE FORM
When entering this stage, LCD shows as right screen.
SELECT DELETE FORM
L01
Press
Enter
to choose the file shown on the screen, such as L01, or pick up a form either by
keying in its name or by moving ‘
?
’‘
?
‘ to locate it.
When a form is decided, LCD shows as right screen:
Clear memory
Please wait…..
When finishing deleting form, LCD will go to Download mode menu.
