sure that the protection film has been peeled off.
May be the print cartridges are low on ink. Replace empty cartridges.
•
Too much or little ink appears on the page:
Adjust the ink volume: open the DRUCKEN dialog box.
Select the Kontrollfeld GRUNDLAGEN.
Click on tab ERWEITERTE FUNKTIONEN.
Move the ink volume slider toward LIGHT or HEAVY.
Click OK.
Document is misprinted
•
Text and images are misaligned:
If text and imaged are misaligned on your print-out the calibrate the
printer.
•
Parts of the document are missing or not centered:
Open dialog box PAPIERFORMAT and confirm the following options:
Kontrollfeld SEITENEINSTELLUNGEN
PAPER SIZE: appropriate paper size
GRÖßE: activate this option that text and graphics will be adjusted to
the paper format.
AUSRICHTUNG: verify the appropriate orientation.
•
Print-out does not reflect new print settings:
You can adjust certain print settings, e.g
.
print sequence/order.
The
default print settings may differ from the ones set in the dialog boxes
DRUCKEN or PAPIERFORMAT
.
Select appropriate print settings in the application that these settings
conform with the settings in the dialog boxes PRINT / PAPERSIZE
.
Photos are not printed correctly
•
Check
paper
tray:
Make sure that the photopaper is inserted in the optional tray with the
pintable side down.
Slide the paper forward until stop.
Slide the paper guides firmly against the paper.
•
Check printer properties:
Open dialog box PAPERSIZE
and check the following options:
PAGEADJUSTMENT
PAPERSIZE: appropriate paper size
25
