If the core diameter of the new roll is the same as the old one insert roll
pick-up until stop otherwise you have to adjust the roll pick-up to the
core diameter of the new label roll. (An applicable roll pick-up optional
available)
Adjust printer to new label width.
Insert paper into paper feed.
Put roll pick-up with the new label roll in the retainer on the roll unit.
Load
labels.
Before using new labels you have to execute CALIBRATE
GAP/BLACK MARK SENSING.
Troubleshooting
Printer does not print
Check the following:
•
The printer is connected to the power supply.
•
All cables are connected properly.
•
Printer is switched on.
•
Print cartridges are installed correctly.
•
Paper or other print media is inserted correctly in the tray.
•
Top cover is closed.
Check printer-LEDs
The printer LEDs indicate status of the printer and possible problems.
•
Power-LED
flashes.
The printer initializes the print process.
LED stops flashing when printer has received all data.
•
Resume-LED flashes
Paper tray may be empty.
Refill paper tray.
•
Press the resume button on the front of the printer
22
