Page 7
For technical questions, please call 1-888-866-5797.
Item 56226
Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
Cleaning, Maintenance, and Lubrication
1.
BEFORE EACH USE,
inspect the general
condition of the Camera. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• damaged cord/electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2.
AFTER USE,
wipe external surfaces
of the Camera with clean cloth.
3. Contains Li-Ion battery. Battery must be
recycled or disposed of properly. Do not open,
crush, heat above 140° F or incinerate.
Battery Removal
NOTE: Replacing the battery is not advised,
since the Camera contains delicate wiring
and ribbon cables that can be permanently
damaged in the process of battery removal.
1. Remove the four screws from the
back of the camera housing.
2. Gently pull the top of the rear housing out to
release it from the center housing. The rear
housing has two pieces, a smaller piece near
the camera may come off during removal.
3. Remove the four screws from the center housing.
4. Gently pull the top of the center housing out.
The ribbon cable from the camera will
keep it from detaching completely.
5. Carefully cut the wires that connect
the battery to the camera. Recycle or
dispose of the battery properly.
WARNING! TO PREVENT SERIOUS INJURY
FROM FIRE, do not expose the battery to
heat, such as heat from a soldering torch.
Record Serial Number Here:
Note:
If product has no serial number, record month and year of purchase instead.
Note:
Replacement parts are not available for this item.
