Outline L3000E, User Manual

Page: 7 / 8

OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
www.outline.it
7
CONNECTIONS
Audio input connections are made via two combo
XLR/TRS 6.35 mm balanced connectors (pin 1/S:
Shield; pin 2/T: hot; pin 3/R: cold) with an input
impedance of 4.5 kΩ found on the front of the amplifier.
CONNECTING AUDIO INPUTS
CONNECTING AUDIO OUTPUTS
All output connections are made via speakON
connectors. Both bridge and single channel output
connection modes are available. The channels A, B,
C and D can be set in single-ended mode, E and F in
bridge mode. The connections are made via pins 1+/1-
, but outputs B, D and F are also available respectively
on outputs A, C and E via pins 2+/2-.
PSET 4
PSET 3
PSET 2
PSET 1
PSET 1 OR 4
SELECT
A
B
OUTPUT CONNECTION WITH 2 WIRES SPEAKON CABLE
1+/1-
1+/1-
C
D
1+/1-
1+/1-
A
2+/2-
1+/1-
C
2+/2-
1+/1-
SIGN. 1
750W
SIGN. 1
750W
SIGN. 2
750W
SIGN. 2
750W
SIGN. 1
750W
SIGN. 1
750W
SIGN. 2
750W
SIGN. 2
750W
OUTPUT CONNECTION WITH 4 WIRES SPEAKON CABLE
2 x 750W +
2 x 750W
PSET 4
PSET 3
PSET 2
PSET 1
PSET 2
SELECT
OUTPUT CONNECTION WITH 2 WIRES SPEAKON CABLE
E
F
1+/1-
1+/1-
2+/2-
1+/1-
SIGN. 1
1500W
SIGN. 2
1500W
SIGN. 1
1500W
SIGN. 2
1500W
OUTPUT CONNECTION WITH 4 WIRES SPEAKON CABLE
E
2 x 1500W
PSET 4
PSET 3
PSET 2
PSET 1
PSET 3
SELECT
A
B
OUTPUT CONNECTION WITH 2 WIRES SPEAKON CABLE
1+/1-
1+/1-
1+/1-
A
2+/2-
1+/1-
SIGN. 1
750W
SIGN. 2
750W
S IGN. 1+ 2
1500W
SIGN. 1
750W
SIGN. 2
750W
OUTPUT CONNECTION WITH 4 WIRES SPEAKON CABLE
F
1+/1-
S IGN. 1+ 2
1500W
F
2 x 750W +
1 x 1500W
PRESET
The amplifier offers 4 presets, which change the
routing of the signal.
• The standard preset (Preset 1) is designed to
have 4 output channels, each 750 W at 4 Ω. The
input 1 is assigned to the outputs A and B, input
2 to the outputs C and D. It is possible to wire
the outputs in two different ways, either using
four 2-poles speakON connectors (1+/1-) with
four different cables or two 4-poles speakON
connectors (1+/1-, 2+/2-) using only the outputs
A (input 1) and C (input 2).
• Preset 2 offers two output channels in bridge
mode (1500 W at 8 Ω) with input 1 on output
E (1+/1-), and input 2 on ouput F (1+/1-). It’s
possible to use only output E with input 1 on
1+/1- and input 2 on 2+/2-.
• Preset 3 offers three output channels with input
1 on output A (1+/1-), input 2 on output B (1+/1-)
and both inputs on the output F (1+/1-) in bridge
mode. The output connection with 4 -poles
cable is also available using only output A (input
1 on 1+/1-, input 2 on 2+,2-) instead of A and B.
• Preset 4 offers four output channels with input
1 on outputs A and B, or just on output A with
4 poles cable (1+/1-, 2+/2-), and the input 2 on
output C and D or just on output C (1+/1-, 2+/2-)
with the same configuration.