OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
www.outline.it
3
SYSTEM DESCRIPTION
The L3000’s four channels of amplification com-
bined with internal DSP provide the perfect solution
for many applications. The flexible two, three or four
channels format is ideal for installations but also for
portable systems. Up to 3000 W in a really compact
wooden chassis, weighing just 3.4 kg/ 7.5 lb, L3000
is a flexible, cost-effective solution for small sound
system. This amplifier offers small dimensions, light
weight and the traditionally amazing sound quali-
ty and reliability of all Outline products. The L3000
can deliver up to 750 W per channel at 4 Ω or 1500
W in bridge mode at 8 Ω. Outline amplifiers deliv-
er crystal-clear highs, and a tight, well-defined low
end. Proven design features ensure extremely high
performance in terms of super low total harmonic
distortion, optimal frequency response and damping
factor across a vast number of application scenar-
ios. The PWM output stage allows to transform all
the energy drawn from the main into usabe power
and offers maximum performance, high predictabili-
ty and immunity from intermodulation artifacts.
TECHNICAL SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
Number of channels
4
Output power (per channel)
Single channel mode: 4 x 750 W @ 4 Ω
Bridge mode: 2 x 1500 W @ 8 Ω (or 1 x 1500 W @ 8 Ω + 2 x 750 W @ 4 Ω)
Max output voltage
Single channel: 78 Vpeak Bridge: 156 Vpeak
Max output current
Single channel: 30 Apeak Bridge: 30 Apeak
AC Main Power
Universal, Regulated switch mode with PFC (Power Factor Correction)
Rated Power Supply Voltage: 100 V - 240 V ± 10%, 50-60 Hz
Operating Voltage: 90 V - 264 V
Power consumption
Standby:
<
1 W (with an aux load
<
100 mW)
Idle:
≤
10.2 W @ 100-240 V AC
Rated Load (1/4 Max Power): 700 W
Gain
26 dB
Frequency response
20 Hz - 20kHz (±0.5 dB) @ 1 W, 8 Ω
S/N Ratio
>
115 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation
>
80 dB @1kHz
THD+N
<
0.08% from 1 W to half power (typically
<
0.05%)
Noise floor
-80 dBV (20 Hz - 20 kHz, A-weighted)
Input sensivity
11 dBu
Input impedance
4.5 kΩ balanced
Damping factor
>
500 @ 1kHz
Integrated DSP
I/O EQ, Cross-over, Delay, Gain, Limiter
PHYSICAL
Input connector
2 x XLR-F - Analog signal input
Network connector
USB type B (L3000), Ethernet RJ45 (L3000E)
Output connector
6 x speakON
Height
87.5 mm - 3 1/2”
Width
210 mm - 8 1/4”
Depth
320 mm - 12 5/8”
Weight
3.4 Kg - 7.5 lb
