Outlaw 7000x, Owner'S Manual

Page: 4 / 14

Outlaw Audio 2
Please Read First
CAUTION: To reduce the risk of electric shock, do not remove the cover.
WARNING:
appliance to rain or moisture.
in an equilateral
triangle, is intended to alert the user to the presence of
uninsu lated “dangerous voltage” within the product’s
a risk of electrical shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: Important Safeguards
Ô
Power-Cord Protection Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords where they
enter a plug, or a convenience receptacle, and the point where they exit
from the unit.
Ô
Outdoor Antenna Grounding If an outside antenna or cable
system is connected to the unit, be sure the antenna or cable system
is grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire
to an antenna-discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Ô
Lightning For added protection for the unit during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the unit due to lightning and
power-line surges.
Ô
Power Lines An outside antenna system should not be located in
the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them
might be fatal.
Ô
Overloading Do not overload wall outlets, extension cords, or
electric shock.
Ô
Object and Liquid Entry Never push objects of any kind into the
unit through openings as they may touch dangerous voltage points or
liquid of any kind on the unit.
Ô
Servicing Do not attempt to service the unit yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to Outlaw Audio.
Ô
Damage Requiring Service
Unplug the unit from the wall outlet
and refer servicing to Outlaw Audio under the following conditions:
»
When the power-supply cord or plug is damaged,
»
If liquid has been spilled, or objects have fallen into the unit,
»
If the unit has been exposed to rain or water,
»
If the unit does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operat-
ing instructions as an improper adjustment of other controls may result
in damage and will often require extensive work by Outlaw Audio to
restore the unit to its normal operation,
»
If the Model 7000x has been dropped or damaged in any way, the unit
should be examined by Outlaw Audio.
Ô
Heat The unit should be situated away from heat sources such as
that produce heat.
IMPORTANT SAFETY NOTE
Before connecting a new component
such as the Model 7000x to your audio or home theater system it is always
unplugged from their AC power source. Many modern electronics products feature
automatic turn-on circuits that may be activated during an installation, causing
the potential for damage to electronic components and/or speakers. Such damage
responsibility for any such damage.
Precautions
Verify The Line Voltage
Audio before plugging the unit into a wall outlet.
Verify AC Circuit Capacity
draw under full load conditions. To insure proper performance, and to
avoid potential safety hazards, we recommend that it be connected to
the same circuit, or connecting it to a circuit used by other heavy power
devices, such as air conditioners, may cause circuit breakers to trip.
It is always a good idea to avoid using any audio or video
equipment on the same AC circuit as equipment with motors, such
as air conditioners or refrigerators. This will lessen the possibility of power
Extension Cords and Power Strips
We do not recommend that extension cords be used with this product
load conditions. Most inexpensive extension cords are not capable of such
high-current loads.
Similarly, should you use a power strip, surge protector or any type of AC
power line conditioning equipment, make certain that it is also able to
handle the high current loads this product will produce.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the
considerable length of time, disconnect the plug from the AC outlet. If
with all electrical devices, do not run power cords under rugs or carpets or
place heavy objects on them. Damaged power cords should be replaced
Wiring
Cables that are run inside of walls should have the appropriate markings
to indicate complaince with, and listing by the UL , CSA or other standards
required by the UL, CSA, NEC or your local building codes. Questions about
a licensed electrician or low-voltage contractor.
Installation Location
To assure proper operation and to avoid the potential for safety hazards,
any additional items in the equipment rack, or on the shelf.
has adequate ventilation on the top as well as the bottom. The height of
the feet is the minimum required clearance. In particular, it is a good idea
circulation. DO NOT place CDs, DVDs, videotapes, owner’s manuals, or other
-
If the unit is to be enclosed in a cabinet or rack, make certain there is
hot air may exit, and cool air may enter the cabinet. In some instances,
the cabinet. If you are in doubt as to the ventilation requirements for your
Ô
Read Instructions All the safety and operating instructions should
be read before the unit is operated.
Ô
Retain Instructions
The safety and operating instructions should be
retained for future reference.
Ô
Heed Warnings All warnings on the unit and in the operating
instructions should be adhered to.
Ô
Follow Instructions All operating and user instructions should be
followed.
Ô
Cleaning Unplug the unit from the wall outlet before cleaning. The
unit should be cleaned only as recommended by the manufacturer.
Ô
Attachments
Do not use attachments not recommended by the unit
manufacturer as they may cause hazards.
Ô
Water and Moisture Do not use the unit near water–for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet base-
ment; or near a swimming pool.
Ô
Accessories
Do not place the unit on an unstable cart, stand, tripod,
bracket, or table. The unit may fall, causing serious injury to a child or
adult, and serious damage to the unit. Any mounting of the unit should
follow the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
Ô
Ventilation Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the unit and to protect it
from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. The unit should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation
is provided. There should be free space of at least 8cm (3 in.) and an
opening behind the unit. The feet are engineered to be the minimum
height required for proper ventilation, and must not be removed.
Ô
Power Sources The unit should be operated only from the type of
power source indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult your unit dealer or local
power company.
Ô
Grounding or Polarization The unit may be equipped with a
polarized alternating current line plug (a plug having one blade wider
This is a safety feature. If you are unable to insert the plug fully into the
a licensed electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.