Outland Technology UWS-3410, Operating Instructions Manual

Page: 11 / 34

OUTLAND TECHNOLOGY INC.
UWL-40 1 UNDERWATER LIGHT
Operating and Maintenance Procedures
Reference: DRAWING UWL-40 1
Installation and Operation:
A. The UWL-40
1
, can be mounted to your Camera, ROV, Helmet or Hand
bracket by using DHM-60 OR HM-300 helmet bracket.
B. With Power Off , lubricate the light mating connector with a
light coating of silicon lubricant. Slide the locking sleeve of the
mating connector back. Align the raised dot on the connector with the
large connector pin on the light connector and plug in. Securely
tighten the locking sleeve.
THERE ARE NO USER SERVICEABLE PARTS INSIDE. PLEASE SEND BACK TO THE FACTORY FOR
SERVICE.
The only maintenance required is to flush with fresh water and dry for storage.