19
Ramp Model Features
Patio Side Step
The patio side entry steps are also included with the patio feature. The step assembly includes a built-in
handrail as well as adjustable stabilizing footpads and ramp support jack.
The step assembly must be
secured into place on the ramp with support leg down and adjusted properly before using the
ramp in the patio position.
Refer to
'Patio Set-up Procedure'
for additional operating instruction.
Patio railings can be
quickly removed from
the RV if you choose to
leave them behind.
Unfold railings from
their stowed position,
remove safety pins, then
lift railing assemblies
until they separate from
their component bracket
on the ramp door
column.
Patio railings may be latched into
the fully open position while
loading cargo. The latch above is
shown in the 'latched' position.
Pull up on the ring to disengage
the latching pin then turn the ring
and pin 1/4 turn.
Remove safety pin from bracket
set prior to removing railing.
Patio railings shown fully
installed with safety pin
in place.
Safety pin shown in place
