11
Ramp Model Features
The sofa(s) have one locking pin at each
end. The locking pin is temporarily
removed when folding the sofa into the
storage position against the wall of the RV.
Locking pins MUST be installed at all other
times. Remove only to pivot sofa unit up or
down then immediately reinstall. This
bracket is shown with the sofa in the
seating/sleeping position and locking pin
securely in place.
This image shows a sofa in its storage
position against the wall with the locking
pin in place as indicated with the red arrow.
If desired, the entire sofa assembly can be
removed from the bunk lift by removing the
screw at the top of the sofa bracketry as
indicated with the yellow arrow. After
removing the screw, the sofa assembly must
be lifted vertically to disengage the
bracketry from the bunk lift trolley
mechanism. The bunk lift system will
operate normally without the sofa(s)
attached.
