The Guardian
Handrail by Outdoor Solutions Inc
Installation Instructions
Tools needed: power drill, #2 Philips screw driver bit
Part Identification
1.
Attach lower rail to four threaded stud in the base using (4) flat washers and (4) hex nuts as shown in fig
1. Do not tighten until step 2.
2.
Attach (2) support arms; using (4) flat washers,(2) hex screws and (2) hex nuts as shown in figure 2.
Tighten all (6) hex nuts with the 7/16” wrench and both hex screws using the hex wrench provided.
3.
Attach the mid rail to the lower rail using (4) flat washers and (4) hex screws as shown in figure 3. Tighten
using hex wrench supplied. Thread adjustment knob into mid rail as shown in fig 3. Hand tighten only.
Part Identification
•
(12) Flat Washers
•
(6) hex nuts
•
(6) Hex Screws
•
(1) adjustment Knob
•
(1) hex wrench
•
(1) upper Rail
•
(1) mid rail
•
(1) lower rail
•
(2) support arms
(see figure 2)
Please email
with any questions or missing parts.
