3
Assembly Instructions
Tools Required: Knife or scissors, Phillips head screwdriver and wrench
. To avoid losing any small components or hardware, assemble your product on a hard level surface
that does not have cracks oropenings.
. Clear an area large enough to layout all components and hardware.
. When applicable, tighten all hardware connections by hand first. Once the step is completed, go
back and fully tighten all hardware.
. Follow all steps in order to properly assemble your product.
. The estimated assembly time is: 30-35 minutes.
Step 1
Attach air vent to lid (A Screw 1Pc / D Wing nut 1Pc)
Attach lid handle to lid (E Wing Nut 2Pcs / F Washer 2Pcs / G Lock Washer 2Pcs)
A
D
F G E
Step 2
Attach ash receiver slide to bottom bowl (B Screw 1Pc / E Wing nut 1Pc)
B
E
