Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 23
39.
Locate 2
Roof Battens Long
and place on Roof Rafters. Place
at top of Rafter section where Rafters and Ridge boards meet. Batten
should be positioned evenly on 4th Rafter. Batten will overhang out-
side Rafter by 3 3/4”.
Parts (Step 51 - 57)
Roof Battens Long
(3/4” x 3 1/2” x 72”)
x 8
Roof Battens Outside
(3/4” x 3 1/2” x 49 1/4”)
x 8
Roof Battens Inside
(3/4” x 3 1/2” x 45 1/2”)
x 4
Batten Spacer
(3/4” x 1 1/2” x 14 1/8”)
x 12
Hardware (Steps 51 - 57)
S2
- 1 1/4” Screws
92 x total
3 3/4”
Flush to Ridge Board
40.
Attach each
Batten
to Rafters with
4 - 1 1/4” screws
per Rafter section.
Important:
pre-
drill pilot holes with 1/8” drill bit first to prevent splitting.
41.
Place
Batten Spacer
flush with first set of Battens on outside Rafter. Batten Spacer allows
you to line up next row of Battens. Attach each with
Batten Spacer
with
2 - 1 1/4” screws
.