8
Outdoor Lifestyles • ODPLAZA-L24S Installation Manual • 4079-311 • Rev B • 04/19
B. Clearances to Combustibles
When selecting a location for the appliance it is important
to consider the required clearances to walls (see Figure
3.2).
WARNING! Risk of Fire or Burns!
Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be lo-
cated out of traffic and away from furniture and draperies.
NOTICE:
Illustrations reflect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
Figure 3.2 Clearance to Combustibles
Minimum Enclosure Dimensions and Clearances to Combustible Surface
A
C
B
D
D
E
Minimum clearances to
combustible walls,
floor and ceiling
Appliance enclosure must be
made entirely of non-combustible
materials
A
B
C
D
E
ODPLAZA-L24S
in
17
17
45
8
8
mm
432
432
1143
203
203
C. Constructing the Appliance Enclosure
Note:
Take drainage into consideration when building
enclosure.
• The appliance enclosure must be made entirely of non-
combustible materials such as metal studs and cement
board.
• Minimum enclosure dimensions. See Figure 3.2.
• The gas valves must be located on the outside of
enclosure or in an optional box and easily accessible.
• Construction materials must be non-combustible if closer
than the minimum clearances shown in Figure 3.2.
