www.desatech.com
122789-01A
2
Align holes in bottom edges of cabinet base with holes in base.
Attach with 1 screw (C), 1 washer (D) and 1 nut (E) for each of
the 9 holes. Set assembly upright.
4. Install chain retainers (“S” hooks) to upper edges of cabinet
base.
3. Being careful not to scratch paint, lay cabinet base onto back side
(use foam packaging block to support rear top of cabinet base).
Base assemBly
1. Turn base upside down. Attach 2 wheels, 2 hex bolts (A) and 2
nuts (J). Do not overtighten.
2. Attach 4 base feet to base weight with 4 washers (B) and 4 screws
(A). Feet will install over raised areas underneath base weight.
