4
Assembly Instructions
1.
Remove Cove-1242-Base from Packaging crate
Four People are required to lift base out of packaging
and place into final location.
2.
Sparker Box Installation
Remove sparker cap and hex nut. Insert AAA battery
(not included) with + end out.
Install sparker into control panel as shown below,
secure using hex nut and replace sparker cap.
Depress sparker button to ensure your sparker is
working properly. You should hear the spark behind the
sparker box.
Locate and orient
sparker box on
control panel as
shown. Sparker box
must be installed
before burner valve.
